The use of integrated wiring label [2012-02-23]
Wiring label system implementation is to the user for the future of the maintenance and management to bring maximum convenience, improve the management level and work efficiency, reduce the network configuration time.
All you need to identify the facilities should have wiring labels, each cable, optical cable, wiring equipment, the contact part, earthing device and laying pipelines shall be given a unique identifier. Identifier should use the same number of letters and Numbers indicate, according to certain patterns and rules. Suggestions according to the concept of "permanent identity" choice materials, the life of the label should be able to as opposed to a wiring system design life should be. Recommendation label material conforms to the UL969 (standard) or certification in order to achieve permanent identity assurance; At the same time advise label to meet the requirements of environmental protection RoHS directive.
All tags should maintain a clear, complete, and meet the requirements of the environment. Label should be printed, are not allowed to manually fill out, should be clearly visible and easy to read. Special stress is that tag should be able to stand the test of the environment, such as damp, high temperature, ultraviolet light, should be the same as the identified facilities or longer service life.
Polyester, vinyl, or polyolefin material is usually the best choice. Document to the management of all facilities. Documents shall be carried out by using the computer documentation and preservation, simple and small wiring project can be managed by paper documents such as drawings, and do the record accurate, timely updates, easy to consult, documentation should realize localization.
1. Indoor and outdoor use
For indoor and outdoor use, should be able to stand the test of the environment, such as damp, high temperature, ultraviolet light, should be the same as the identified facilities or longer service life. Recommendation label material conforms to the UL969 (standard) or certification in order to achieve permanent identity assurance; At the same time advise label to meet the requirements of environmental protection RoHS directive.
2. The cable marking
Cable cover protective film is the most commonly used tags, the tags with viscous and outside of the part to print with a layer of transparent protective film, can protect the label print fonts from wear and tear. In addition, single cable/jump line can also use the coated label, flag label, heat shrinkable sleeve type label. Commonly used type of material includes: vinyl, polyester and polyvinyl fluoride.
For bundles of cables, it is recommended to use id card for identification. This sign can be through the printer for printing, nylon cable tie or felt band and fixed wire bundle, horizontal or vertical placed, identity itself should have good anti tear properties, and conform to the ROHS standard.
Cable cover protective film is the most commonly used tags, the tags with viscous and outside of the part to print with a layer of transparent protective film, can protect the label print fonts from wear and tear. In addition, single cable/jump line can also use the coated label, flag label, heat shrinkable sleeve type label.
3. The wiring panels/export standard
Wiring panel identification mainly plane logo, material enough to stand the test of the environment, and conform to the requirements of the ROHS corresponding environment, in all kinds of solvent can still maintain the good image quality, and can stick to, including low surface energy plastics of all kinds of surface.
Label should be printed, are not allowed to manually fill out, should be clearly visible and easy to read. All tags should maintain a clear, complete, and meet the requirements of the environment.